MGF Luggage Rack

MGF luggage rack :

Revo-Rack Black £329.95 / 349€

Revo-Rack PA £389.95 / 419€

bright blue mgf with a revo-rack black luggage rack fitted photographed close at the rear

No metal clamps on fragile boot lid edges. Tested by our customers since 2016

 

Revo-Rack is a unique design of MGF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges. Revo-Rack can be fitted in under a minute.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your MGF using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

 

silver XXX with a black revo-rack luggage rack fitted photographed very close

Revo-Rack attaches with soft rubber vacuum cups, no metal clamps that damage paintwork

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Please see what our customers think of the Revo-Rack 

Why a Revo Rack MGF Luggage Rack ?

  • No clamps
  • No bolts
  • No drilling
  • No paint damage
  • In manufacture since 2016 tried tested and enjoyed by thousands globally
  • Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.
  • Perfect for modern MG sports cars with small panel gaps that make fixing a traditional clamp based rack almost impossible : no room for the clamp feet
  • Revo Racks load carrying capacity has been rated at 20kg / 45Ibs
  • Fitted and removed in under a minute ( see video below )
  • Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
  • Supplied with two luggage racks and a cotton storage bag

 

The Rack Frame :

This MG luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The rack frame measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to your MG's boot/trunk lid using three 115mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still acknowledged as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

Soft rubber will not scratch mark or chip your MG

Revo-Rack being tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.

MGF Luggage Rack

MGF Luggage Rack Fitted & Removed In Seconds

MGF Luggage Rack with spoilers

Works for MGF with Spoilers

mgf luggage rack stainless steel

Revo-Rack PA is hand polished for a deep shine

mgf luggage rack

No fiddly brackets or clamps to tighten

mgf luggage rack

Can be fitted with hoop at the rear or front of the boot lid.

mgf mgtf stainless steel boot rack

Manufactured with pride care and precision.

Optional anti theft strap secures the revo-rack if you leave the car unattended.

Metal on paint only ends one way

No 3M stickers to compensate for poor design

mgf luggage rack stainless steel close

Vacuum cup pumped and secured to paintwork

 

MGF Luggage Rack ; Fitted in 30 seconds

Revo Rack MGF Luggage Rack ; Secure, Stable, Safe