Audi R8 Spyder Luggage Rack : Revo-Rack £229.95 / $285 / €275
Revo rack is a completely new type of Audi R8 Spyder luggage rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge its universal design also allows it to fit any boot lid that takes the foot print of the rack, irrespective of size or shape.
With the Revo-Rack Luggage Rack no metal touches your car only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your R8's boot or trunk.
Why a Revo-Rack Audi R8 Spyder Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- Does not interfere with spoiler deployment
- Perfect for todays sports cars with panel gaps too small for a traditional clamp
- Fits any boot lid that takes the racks foot print of 102 x 48 cm / 58" x 29"
- Revo Racks load carrying capacity has been rated at 25kg / 55Ibs
- Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult.
- If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
- The Revo-Rack is not designed for permanent fitting.
The Rack Frame :
This Audi R8 Spyder luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your Audi's boot/trunk lid using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid
Revo Rack Audi TT Luggage Rack ; Fitted in 30 seconds
Audi TT Roadster Luggage Rack ; Secure, Stable, Safe