BMW Z4 G29 Luggage Rack :
Revo-Rack Black £229.95
Revo-Rack PA £269.95
Revo-Rack is a new type of BMW Z4 G29 luggage rack it eliminates the risk of paint damage, caused by steel clamps or straps on the boot/deck lid edge. We manufacture the rack ourselves and its available in two finishes powder coated black or a version thats hand polished and anodised for a deep lasting shine.
With the Revo-Rack car boot rack no metal touches your BMW G29 only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk. Due to the shallow boot/deck lid on the G29 we manufacture a specific model with one of the vacuum cups moved to the cross rail.
Revo-Rack has been independently safety tested by TUV Italy. Along with braking and speed tests to a loaded rack they applied a 645N force. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it the rack stayed secure and did not bend or deform. Revo-Rack is accredited to ISO 11154 2006. The international standard for roof bars ; there is no luggage rack standard. Its the only luggage rack ever, to have passed these tests.
Why a Revo-Rack BMW Z4 G29 Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- Designed and engineered for the BMW Z4 G29 small panel gap and curvaceous shut line.
- Revo-Racks load carrying capacity has been rated by TUV Italy at 21kg / 50Ibs
- Certified to ISO 11154 : 2006
- Fitted in 90 seconds without tools
- Supplied with two luggage straps & cotton storage bag
The Rack Frame :
This BMW Z4 is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your BMW's boot/trunk lid using three 115mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the paint surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden inside the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid.
BMW Z4 G29 Luggage Rack ; Fitted in 90 seconds