Porsche Boxster 986 Luggage Rack :
Revo-Rack Black £329.95 / $379 / 349€
Revo-Rack Black £389.95 / $449 / 419€
No metal clamps on fragile boot/trunk lid edges and enjoyed by our customers since 2016
Revo-Rack is a unique design of Porsche Boxster 986 Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges. Revo-Rack can be fitted in under a minute.
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your 986 Porsche Boxster using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
Revo-Rack attaches with soft rubber vacuum cups, no metal clamps that damage paintwork
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Please see what our customers think of the Revo-Rack
Why a Revo-Rack Porsche Boxster 986 Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- In production since 2016 tested tried and enjoyed by thousand's globally
- Designed and engineered for Porsche Boxster
- Not immediately obvious how to remove the rack - theft is difficult.
- Ultra Lightweight aluminium & magnesium frame. 1.67kg
- Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
- Revo-Rack has been independently safety tested by TUV Italy. Along with braking and speed tests to a loaded rack they applied a 645N force. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it the rack stayed secure and did not bend or deform . If attached properly Revo-Rack is as secure if not more secure than a traditional clamp rack.
- Supplied with luggage straps and cotton storage bag
- Shipped in the UK in 48hrs
- We ship globally from our warehouse in Rotterdam
The Rack Frame :
This Porsche Boxster 986 Luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The rack measures 900x420mm / 36"x17"
Revo-Rack PA is hand polished for a deep luster
The Supports :
The rack is secured to the rear of your Porsche using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid
Soft rubber cannot scratch chip or damage your Porsche
Revo-Rack undergoing testing, here having a lifting load of 65kg/145 lbs applied.
Porsche Boxster 986 Luggage Rack : Revo-Rack Black
Can be fitted with hoop at the front or rear of the boot/trunk/deck lid
Revo-Rack PA has a deep shine as a result of hand polishing
Perfect fit on the 986
Modern design and materials for a modern sportscar.
Vacuum cup pumped and secured to boot/deck lid
Optional anti theft strap secures the revo-rack if you leave the car unattended.
Metal on metal only ends one way
Luke used a Revo-Rack to transport his surf board from Germany to the east coast of France without any issues on the 1500 mile trip.
One use stickers, not ideal is it ?
The waterproof boot-bag vacation luggage bag fits the Revo-Rack perfectly ( also manufactured by us )
