Mazda Miata RF Luggage Rack
Revo-Rack Black $325
Revo-Rack Polished anodised $375
Revo-Rack is a completely new type of Mazda Miata RF Luggage Rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the trunk lid edge.
With the Revo-Rack trunk rack no metal touches your Miata RF only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's trunk. We make two models with the same frame design and same T5 aluminum tubing, one is powder coated black the other is hand polished and then anodised to give it a deep luster.
Why a Revo-Rack Mazda Miata RF Luggage Rack ?
- No clamps on the fragile aluminum deck lid edge
- No bolts
- No drilling
- No Straps
- No paint damage
- Conceived, designed and engineered for the MK4/ND MX5/Miata
- Roof Operation is possible with the rack fitted
- Due to the 1/8" panel gap on the RF its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
- Revo-Racks load carrying capacity has been rated at 50Ibs
The Rack Frame :
This Miata RF luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lb perfect for the RF s aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"
If you have a US Miata RF with the shark antenna fin on the trunk lid, you will have to mount the rack as shown this allows roof operation and the rack does not foul the antenna. The rack is supplied with two additional spacers to allow it to sit level on the deck lid.
The Supports :
The rack is secured to your Miata's RF's trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk lid
Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future.
Revo-Rack Mazda Miata RF Luggage Rack ; Fitted in 30 seconds & roof can be operated
Revo-Rack Mazda Miata RF Luggage Rack ; Secure, Stable, Safe