Miata Trunk Rack

Miata Trunk Rack :

Revo-Rack Black $409.95 

Revo-Rack PA  $489.95 

 

red mazda miata on a mountain road with snow and trunk rack fitted carrying a grey bag

No metal clamps on trunk lid edges, certified to carry 45lbs and enjoyed by customers since 2016

 

Revo-Rack is a unique design of Miata Trunk Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the trunk/deck lid edges. With the Revo-Rack no metal touches your MX5/Miata only soft rubber vacuum cups. These use the pressure of the atmosphere to secure the rack to your Mazda's trunk. We have been manufacturing the Revo-Rack since 2016 its available in either a black finish or a version thats hand polished then anodised to create a deep shine. Revo-Rack is suitable for every Mx5/Miata since 1989.

Revo-Rack attaches to your Miata using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

close up of a revo-rack luggage rack

Attached with soft rubber vacuum cups no metal clamps that damage paint

We are of course aware that Mazda suggests a maximum load of 22lbs for their carbon fibre rack on the MK4/ND because of the cars aluminium trunk lid. This clamps on a like a conventional rack with the weight of the rack and load spread over a very small area, approx 16 inches square ; the footprint of the clamps on the edge of the trunk.

With the Revo-Rack the load is spread over a much greater area over 120 inches ; the footprint of the vacuum cups. Its spread load not a point load like a conventional rack, hence the Revo-Rack can carry a greater load ( 20kg/45lbs ) with no risk of damage to the trunk lid.

Revo-Rack has been independently safety tested by TUV Group. Along with braking, speed and lab testing to a loaded Revo-Rack one of the criteria for certification involves a 645N force test. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it. ( shown below ) The Revo-Rack stayed secure and did not bend or deform. If attached properly Revo-Rack is as secure if not more secure than a traditional clamp rack. See the full test criteria here  

 

red mazda miata nd with a revo-rack luggage rack fitted carrying a snowboard in the snow

Enjoyed by customers since 2016

Why a Revo-Rack Miata Trunk Rack ?

  • No clamps
  • Precision made lightweight aluminium & Magnesium alloy frame
  • Tested by customers since 2016
  • No bolts
  • No drilling
  • No Straps
  • No paint damage
  • Fits ALL Miata Models 1989 - Present ( inc RF/ND )
  • Conceived designed and engineered for the Miata.
  • Independently certified to carry 45lbs safely
  • The  tiny panel gap on the ND & RF 1/8" between the trunk and rear quarter its too small for a traditional clamp to fit, the 45 degree lip inside the trunk makes this almost impossible.
  • Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
  • Supplied with two luggage straps and cotton storage bag
  • Shipped to the USA in 2-5 days with DHL, no state tax no import tax

 

 

The Rack Frame :

This Miata Trunk rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lb  The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The Revo-Rack measures 36"x17"

Revo-Racks frame is precision manufactured on the latest CNC machines, this ensures a high quality frame with no 'flaring'  or compression of the tube on the bends/straights

 

The Supports :

The rack is secured to your Miata's trunk lid using three 5" vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk lid

 

 

Soft rubber cannot chip scratch or damage paintwork

Please don't risk paint damage with an inferior rack.

 

 

buy now revo-rack button

silver mazda mx5 nb with a black revo-rack trunk rack fitted photographed close at the rear

Revo-Rack Black

white miata prht with a stainless steel luggage rack fitted

Revo-Rack PA is hand polished and then anodised for a deep shine here on a PRHT NC

black miata nd with a revo-rack luggage rack fitted to the trunk

Revo-Rack was developed in 2015 for the ND but fits all models

blue mazda mx5 miata na mk1 with a revo-rack stainless steel luggage rack fitted

No clamps to chip and mark the fragile trunk lid edges, on your pride & joy.

blue mazda miata mk4 nd with a revo-rack pa luggage rack fitted photographed from the side

We manufacture a specific model if your ND has the sirius antenna its not an issue.

Independently tested and certified to carry 45lbs.

red miata nc with a stainless steel luggage rack fitted to it

Fitted in 90 seconds without a wrench

white mazda miata RF with an orange stripe and a revo-rack luggage rack fitted to the trunk

We have thousands of happy American customers

mazda miata rf luggage rack

Roof can be operated if rack is fitted to trunk as shown

white mazda mx5 mk4 with the hood down and a revo-rack luggage rack fitted with a waterproof luggage bag on it

The waterproof boot-bag vacation (Also made by us) fits the Revo-Rack perfectly.

red miata mx5 nd with a luggage rack fitted carrying a large silver suitcase outside a bbq restaurant in Austin Texas

We have thousands of happy North American customers

Revo-Rack undergoing independent high speed testing in 2016 ( 120mph / 200kph ) by TUV at the Nardo test track in southern Italy

No 3M tape with a Revo-Rack !

 

Revo-Rack  Miata Trunk Rack ; Fitted in 90 seconds

 

 

Revo Rack Mazda Miata Trunk Rack ; Secure, Stable, Safe