TVR Luggage Rack

TVR Luggage Rack :

Revo-Rack Black £329.95 /  349€ 

Revo-Rack PA £389.95 / 419€

blue tvr tamora roof down with a black luggage rack fitted at a car show

No metal clamps to chip paint and certified to carry 20kg

Revo-Rack is a unique design of TVR Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot lid edge. We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your TVR using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

silver XXX with a black revo-rack luggage rack fitted photographed very close

Revo-Rack attaches with soft rubber vacuum cups, no metal clamps that damage paintwork

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Why a Revo-Rack TVR Luggage Rack

  • No clamps
  • No bolts
  • No Straps
  • No paint damage
  • Fits Griffith,S, Tamora & Chimera
  • Revo-Racks load carrying capacity has been rated at 20kg 
  • In manufacture since 2016 used enjoyed and throughly tested by thousands of happy customers.
  • Not immediately obvious how to release the rack from the boot lid - Impossible to pull off therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.

 

The Rack Frame :

This TVR luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb  The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to your TVR's boot lid using three 120mm/5" vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

tvr luggage rack details

Soft rubber cannot chip scratch or damage paintwork

Manufactured by us with care precision and pride

 

side photo of the boot lid of a TVR Tamora with. black luggage rack fitted

Revo-Rack even fits the Tamora

 

TVR Luggage Rack

TVR Luggage Rack - Revo-Rack

tvr s luggage rack

Revo-Rack PA is hand polished for a deep shine

tvr chimera stainless steel luggage rack

Revo-Racks fit all TVR convertibles

tvr chimera luggage rack

No clamps to damage boot edge

burgundy TVR S with a black luggage rack fitted photographed from the rear

Certified by TUV Germany to carry 20kg

red TVR griffith 500 with a revo-rack black luggage rack fitted photographed from the rear on a sunny day

Lightweight aluminium frame perfect for composite bodywork.

mazda mx5 luggage rack anti theft cable

Optional Anti Theft Cable £4.95

mazda mx5 luggage rack revo-rack with a boot-bag vacation fitted

The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly ( its also manufactured by us )

 

 

Revo Rack TVR Luggage Rack ; Fitted in 30 seconds

 

Revo Rack TVR Luggage Rack ; Secure, Stable, Safe