Z4 Trunk Rack

Z4 Trunk Rack : Revo-Rack $319

Revo-Rack is a completely new type of Z4 trunk rack that eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge.

With the Revo-Rack car boot rack no metal touches your BMW only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Z4's boot or trunk.

The standard Revo-Rack will fit the trunk of Z4 E89 ( Folding metal roof ), the E85 requires a specific rack with multi directional fittings due to the curve of the trunk lid this is an extra $15 please ake sure your order the right model.

Please read what our customers think of the Revo-Rack

Why a Revo-Rack Z4 Trunk Rack ?

  • No clamps
  • No bolts
  • No drilling
  • No paint damage
  • Perfect for todays BMW cars with panel gaps too small for a traditional clamp on the boot/trunk lid edge
  • Revo-Racks load carrying capacity has been rated at 25kg / 55Ibs
  • Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
  • The Revo-Rack is not designed for permanent fitting, its designed to be used for a days driving/travel then removed from the car. Remove it, re moisten the vacuum cups with water and refit on multi day trips. ( It takes 1 minute )

The Rack Frame :

This Z4 trunk rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to your BMW's trunk lid using three 120mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

Soft rubber can never ship or scratch paintwork

revo rack luggage rack for bmw z4 tested

Vacuum cups are more powerful than you think, here holding 25kg upside down. Watch the video here

z4 trunk rack

Z4 Trunk Rack : Revo-Rack

z4 trunk rack e85

The Z4 E85 requires a specific rack with multi directional stainless steel joints.

bmw z4 trunk rack

No clamps, no brackets no damage to trunk edge or rear quarter.

revo rack BMW Z4 trunk Rack Close

Multi directional joint for the E85

bmw z4 trunk rack e89 with a revo-rack fitted with a boot-bag vacation on it

The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly ( also made by us )

Revo Rack Z4 Luggage Rack Vacuum Cups

Where the Revo-Racks Vacuum Cups were developed.

Revo Rack Z4 Trunk Rack ; Fitted in 30 seconds

Revo Rack Z4 Trunk Rack ; Secure, Stable, Safe


We would love to hear from you.