Mercedes Benz SLK Trunk Luggage Rack
Revo-Rack Black $409.95
Revo-Rack PA $489.95
Revo-Rack no metal clamps on fragile trunk lid edges and certified to carry 45lbs
Revo-Rack is a unique design of Mercedes Benz SLK Trunk Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges. Revo-Rack can be fitted in under a minute.
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible trunk lid is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your SLK using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
Revo-Rack attaches with huge force using soft rubber vacuum cups : no metal clamps on fragile trunk lid edges
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Revo-Rack PA is hand polished for a deep shine
Why a Revo-Rack Mercedes Benz SLK Trunk Luggage Rack ?
- No metal clamps to chip paint
- Shipped to the USA in 2-4 days with DHL
- As the Revo-Rack is less than $800 there are no import duties & no state taxes
- No awkward brackets or clamps
- In manufacture since 2016 tried tested and used by thousand's worldwide
- Conceived, designed and engineered for the SLK's small panel gaps and curvy trunk lid
- All Mercedes SLK's have a panel gap thats too thin for a traditional clamp on the trunk edge 1/8" ish.
- Revo-Racks load carrying capacity has been rated at 45Ibs
- Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
- The Revo-Rack is supplied with two luggage straps and a cotton storage bag
- Tested to ISO 11154
- Shipped globally with DHL
The Rack Frame :
This Mercedes Benz SLK luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium trunk lids. The cross bars are machine welded in place to ensure consistency. The rack frame measures 36"x17"
The Supports :
The rack is secured to your SLK's trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk/deck lid
Soft rubber cannot chip mark or scratch paintwork
Revo-Rack Black fits all SLK models
Manufactured by us since 2015 we have thousands of happy Revo-Rack customers.
No tools required to fit the Revo-Rack
NO metal clamps on fragile tunk lid edges, means no paint chips or scratches.
Fits R172 & SLC
Does not interfere with the trunk antenna on some models
Metal on paint only ever ends one way
One use stickers to protect paint an admission of poor design we think
Vacuum cup pumped and secured to paintwork
Revo-Rack has been certified to carry 45lbs by TUV Italy
