Miata Luggage Rack :
Revo-Rack Black $409
Revo-Rack PA $489
Enjoyed by our American customers since 2016
Revo-Rack is a unique design of Miata luggage rack which eliminates the risk of paint damage, caused by steel clamps or straps on the trunk lid edge. Revo-Rack comes in a choice of to finishes black powder coated or a version thats hand polished and anodised to create a deep shine. We have been making the Revo-Rack since 2016 with thousands sold globally. Revo-Rack fits all Miata models 1989 - today
Revo-Rack attaches to your Miata using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
Revo-Rack attaches with huge force using soft rubber vacuum cups : the grey buttons pump the air out . These are not suction cups
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Why a Revo-Rack Miata Luggage Rack ?
- No clamps
- No bolts
- Shipped with DHL Express in 2-5 days no import tax and no state taxes
- No Straps
- No paint damage
- Fits ALL Miata Models 1989 - Present ( inc RF/ND )
- Conceived designed and engineered for the Miata
- The tiny panel gap on the ND between the trunk and rear quarter its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
- Revo-Racks load carrying capacity has been rated at 45Ibs
- Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
- Supplied with a cotton storage bag and two luggage straps
The Rack Frame :
This Miata luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lb The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"
The Supports :
The rack is secured to your Miata's trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk lid
Soft rubber cannot chip scratch or damage paintwork
Revo-Rack has been tested and certified to ISO 11154 PAS 2006 - the standard for roof racks
The rack went through lab tests as well as evaluation at Porsches test facility in southern Italy.
Please don't risk paint damage with an inferior rack.
Revo-Rack PA is hand polished for a deep shine.
We make a specific model of Revo-Rack for the RF with the rear lip spoiler & antenna with the single vacuum cup moved to the first cross rail.
Revo-Racks fit all Miata models here on a NB
Revo-Racks can carry 45lbs
We have plenty of happy American customers who use there Revo-Racks daily here to carry a walker.
Revo-Racks can be fitted either way around - your call
No clamps to chip and mark paintwork.
The roof can be operated on the PRHT with the rack in place
Revo-Rack fits the iconic NA Miata
Roof can be operated on the RF if rack is fitted to trunk as shown
Tested by customers since 2016
Revo-Racks work in all weathers !
PRHT NC roof misses the Revo-Rack with ease.
If you ND or RF has a spoiler or antenna move the single cup to the first cross rail and it still fits.
Read Mathew's review of the Revo-Rack on his camping road trip :-
"Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $400 the revo-rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future "
