Mazda MX5 RF Luggage Rack :

Revo-Rack Black $659.95 AUD

Revo-Rack PA  $834.95 AUD

Revo-Rack certified to carry 20kg/45lbs on sale since 2016 and no metal clamps on fragile boot lid edges

Revo-Rack is a unique design of Mazda MX5 RF Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 in two finishes black and the PA model which is hand polished and then anodised to create a deep chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015 when the ND/RF was launched. The issue with fitting a conventional metal clamp based luggage rack to the ND/RF is the 2.7mm panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your MX5 using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

We are of course aware that Mazda suggests a maximum load of 10kg for their carbon fibre rack on the ND because of the cars aluminium boot/trunk lid. This clamps on a like a conventional rack with the weight spread over a very small area 20cm².The footprint of the clamps on the edge of the boot/trunk lid.

With a Revo-Rack the load is spread over a much greater area over 300cm² The footprint of the vacuum cups. Hence the Revo-Rack can carry a greater load of 20kg/45lbs with no risk of damage to the boot/trunk lid. Think of this like standing or a frozen lake or skimming across it on your belly. One will cause thin ice to crack the other won’t

Please see what our customers think of the Revo-Rack 

Why a Revo-Rack Mazda MX5 RF Luggage Rack ?

• Shipped to Australia in 3-7 days with DHL Express 
• No clamps on the fragile aluminium boot lid edges
• No Straps
• No paint damage
• In manufacture since 2016 tested, tried and used by thousands of MX5 customers globally
• Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.
• Conceived, designed and engineered for the MK4/ND MX5/Miata
• Due to the 2.7mm panel gap on the RF & ND its too small for a traditional clamp to fit, the 45 degree lip inside the boot makes this almost impossible.
• Shipped with DPD with a one hour delivery slot
• Revo-Racks load carrying capacity has been independently tested at 20kg/45lbs
• Roof operation is possible if the rack is fitted right at the rear of the boot/trunk lid ( video below )
• Supplied with luggage straps and a storage bag

The Rack Frame :

This MX5 RF luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for the MK4's aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The frame measures 900x420mm  /  36"x17"

Vacuum Cups ? :

Revo-Rack is secured to your MX5 RF using three 120mm vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface.Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

The Revo-Racks vacuum cup's pump feature a pump button with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the pump evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows you to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the boot/trunk lid

Soft rubber cannot chip scratch or damage the paintwork on your MX5/Miata RF

Vacuum cup on PA model pumped and secured to boot lid

Roof can be operated with rack fitted