AMG GTC Cabrio Trunk Luggage Rack

Mercedes AMG GTC Luggage Rack

Revo-Rack Black $459.95

Revo-Rack PA $524.95

Revo-Rack is a completely new type of Luggage Rack. It eliminates the risk of paint damage, caused by steel clamps or straps on the deck/trunk lid edges. We manufacture the rack in either a black or a polished and anodised finish.(PA)

With the Revo-Rack luggage rack no metal touches your AMG Mercedes only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your AMG GTC's trunk

Revo-Rack has been independently safety tested by TUV Italy. Along with braking and speed tests to a loaded rack they applied a 645N force. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it the rack stayed secure and did not bend or deform. If attached properly Revo-Rack is as secure if not more secure than a traditional clamp rack. See the full test criteria here

Please see what our customer reviews of Revo-Rack

Why a Revo-Rack Mercedes AMG GTC Cabrio Trunk Luggage Rack

No clamps
No bolts
No drilling
No paint damage
Conceived, designed and engineered for modern Mercedes small panel gaps, too thin for a traditional clamp on the boot/deck lid edge with a 3mm/ 1/8" gap
Revo-Racks load carrying capacity has been rated at 45Ibs
Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
Supplied with two luggage straps and a cotton storage bag

The Rack Frame :

This Mercedes AMG GTC luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to your AMG's boot/trunk lid using three 120mm/5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the paintwork thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the car, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator.A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the trunk lid