Porsche Boxster Luggage Rack – All Models 986 987 981 & 718

Porsche Boxster Luggage Rack :

Revo-Rack Black from C$559.95

Revo-Rack PA from C$659.95

bright blue porsche 987 with a revo-rack black luggage rack fitted at a car show on a sunny day photographed from the rear

Revo-Rack no metal clamps on fragile trunk lid edges, certified to carry 45lbs

Revo-Rack is a unique design of Porsche Boxster Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges. Revo-Rack can be fitted in under a minute.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible trunk lid is the small panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your Porsche using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

close up of a revo-rack luggage rack on an XXX

The grey buttons pump the air out. These are not suction cups

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Please read what our customers think of the Revo-Rack here

Why a Revo-Rack Porsche Boxster Trunk Luggage Rack ?

Shipped to Canada with DHL in 2-5 days
No clamps
No bolts
No drilling
No paint damage
In manufacture since 2016 tried tested and used by thousand's worldwide
Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.
Designed and engineered for Porsche Boxster
Not immediately obvious how to remove the rack - theft is difficult.
Ultra Lightweight aluminium & magnesium frame. 1.67kg
Revo-Racks load carrying capacity has been rated at 45Ibs/20kg
Supplied with two luggage straps and a cotton storage bag.

The Rack Frame :

This Porsche Boxster Luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, The rack frame measures 36"x17"

The Supports :

The Revo-Rack is secured to the rear of your Porsche using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk lid

Soft rubber cannot not chip scratch or mark your Porsche

burgundy porsche boxster 987 S with a black luggage rack fitted photographed from the rear

Revo-Rack fitted in 90 seconds without any tools, no straps across trunk surface to mark and scratch it an no metal clamps on fragile trunk lid edges.