Austin Healey Bugeye Sprite Luggage Rack :
Revo-Rack Black $409 / 349.95€ / £329.95
Revo-Rack PA $489 / 419.95€ / 389.95€
No metal clamps to chip paint and enjoyed globally since 2015
Revo-Rack is a unique design of Austin Healey Bugeye Sprite Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges. Revo-Rack can be fitted in under a minute.
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your sprite using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
Revo-Rack attaches with huge force using soft rubber vacuum cups : no metal clamps on fragile trunk lid edges
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Why a Revo-Rack Bugeye Sprite Luggage Rack ?
- Shipped to the USA in 2-5 days with DHL
- As the Revo-Rack is less than $800 there are no import duties and no state tax will be applied.
- No clamps
- No awkward bolts
- No drilling
- No Straps
- No paint damage
- In manufacture since 2016 tried tested and used by thousand's worldwide
- Revo-Racks load carrying capacity has been rated at 20kg/45lbs on a Frogeye/Bugeye
- Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
- If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
- Supplied with luggage straps and a cotton storage bag
- Tested to ISO 11154
The Rack Frame :
This Austin Healey Bugeye Sprite Luggage Rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the trunk lid
Soft rubber cannot chip scratch or damage paintwork
Vacuum cups are incredibly strong here holding 25kg/50lbs upside down on a MK2 MX5 boot/trunk lid. Watch the full test video
Austin Healy Bugeye Sprite Luggage Rack Revo-Rack PA
No drilling no damage.
Perfect for the Sprite as it has no trunklid edges & no drilling required.
Revo-Rack Black on TR4
Can be fitted with the hoop at the rear or front of the trunk / deck lid
The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly ( its also manufactured by us )
Vacuum cup pumped and secured to paintwork
