BMW Z4 Cargo Carrier :

Revo-Rack Black from $409.95

Revo-Rack PA from $489.95

 

 

Revo-Rack is a unique design of BMW Z4 cargo carrier that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern BMW trunk lid is the 0.16"/2.7mm panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your BMW using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

 

In 2015 Revo-rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Please read what our customers think of the Revo-Rack

Why a Revo-Rack Z4 Cargo Carrier ?

 

• Shipped to the USA in 2-4 days with DHL
• As the Revo-Rack is less than $800 there are no import duties and no US state tax will be applied.
• No clamps
• No awkward bolts
• No drilling
• No paint damage
• Lightweight aluminium frame
• In manufacture since 2016 tried tested and used by thousand's worldwide
• Perfect for todays BMW cars with panel gaps too small for a traditional clamp on the boot/trunk lid edge
• Revo-Racks load carrying capacity has been rated at  50Ibs
• Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
• The Revo-Rack is not designed for permanent fitting, its designed to be used for a days driving/travel then removed from the car. Remove it, re moisten the vacuum cups with water and refit on multi day trips. ( It takes 1 minute )

The Rack Frame :

This Z4 cargo carrier is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 3.6lb perfect for todays aluminium and composite trunk lids. The cross bars are machine welded in place to ensure consistency. The rack measures 36"x17"

Vacuum cups :

 

Revo-Rack is secured to your BMW Z4 using three 5"/120mm vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: These are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

The Revo-Racks vacuum cup's pump feature a pump button with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the pump evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows you to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the trunk lid