Miata NA Luggage Rack

Miata NA Luggage Rack :

Revo-Rack Black $409.95

Revo-Rack PA $489.95

red mazda miata na roof down with a revo-rack luggage rack fitted to the trunk photographed from the rear on a sunny day

Unique design no metal clamps, to chip paint. Enjoyed by customers since 2016

Revo-Rack is a unique design of Miata NA Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern Mazda trunk lid is the 0.16" panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your Miata NA using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

close up of a revo-rack luggage rack

Revo-Rack attaches with vacuum cup technology no metal camps to chip paint

In 2015 Revo-rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Please see what our customers think of the Revo-Rack 

 

silver miata na with a stainless steel luggage rack fitted

Revo-Rack PA is hand polished for a deep shine

Why a Revo-Rack Miata NA Luggage Rack ?

  • Precision made lightweight aluminium & magnesium alloy frame 
  • No metal clamps to chip paint
  • No awkward bolts
  • Shipped to the USA in 2-5 days with DHL
  • As the Revo-Rack is less than $800 there are no import duties & no state taxes
  • In manufacture since 2016 tried tested and used by thousand's worldwide
  • No paint damage
  • Conceived, designed and engineered for the MX5/Miata
  • Revo-Racks load carrying capacity has been certified at 45lb by TUV Italy
  • Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
  • Supplied with storage bag and luggage straps

 

The Rack Frame :

This Miata NA luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb  The cross bars are machine welded in place to ensure consistency. The Revo-Rack measures 36"x17". The frame is available in either a black powder coated finish or a version thats hand polished and anodised.

 

Revo-Racks frame is precision manufactured on the latest CNC machines, this ensures a high quality frame with no 'flaring'  or compression of the tube on the bends/straights

The Supports :

Revo-Rack is secured to your Miata NA using three 5" vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: These are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

The Revo-Racks vacuum cup's pump feature a pump button with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the pump evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows you to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the trunk lid

Soft Rubber cannot chip scratch or damage paintwork

 

Silver mazda mx5 miata roadster with the roof doen and a black luggage rack fitted to the trunk photographed close at the rear

Revo-Rack is the perfect fit on the NA trunk lid and can carry 45lbs

mazda miata na deck luggage rack

No clamps or brackets on the fragile trunk deck lid edges

bright blue mazda miata mx5 na with a revo-rack pa luggage rack fitted photographed at the rear on grass at a car show

We follow Mazda's ethos with a lightweight aluminium frame. Why put a heavy stainless rack on your trunk ?

rear view of a white miata na with a luggage rack fitted

Lightweight precision made alloy frame

Revo-Rack has been independently tested by TUV Italy, they applied a 645N force a lifting force of around 150lbs for 10 minutes to a Revo-Rack with a 50lb load on it and the rack stayed secure. If attached properly Revo-Rack is as secure if not more than a traditional clamp rack.

MX5 MK1 Luggage Rack Closed & Secured To Boot Lid

Manufactured to tight tolerances with care

white mazda mx5 mk4 nd with a revo-rack black luggage rack fitted with a waterproof luggage bag on it

The waterproof boot-bag vacation ( also made by us ) fits the Revo-Rack perfectly

Revo-Rack undergoing high speed testing in 2016 ( 120mph / 200kph ) by TUV at the Nardo test track in southern Italy

red mazda mx5 with a black luggage rack fitted carrying a large suitcase outside a bbq restaurant in texas

Revo-Racks have been tried and tested by thousands of happy customers since 2016

No clamps = no paint chips

We have just completed our second long road trip with the Revo-Rack on the MX-5. This time we did 3,800km, mostly at high freeway speeds, but also plenty of curvy roads, and the rack held fast in all the wind blast and lots of lateral forces. Top up or top down, there was never a worry with the rack and luggage.

We couldn’t be happier with our purchase.

Murray and Lindy
Melbourne, Australia

 

 

 

 

 

 

Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future. 

Matt

USA

 

 

 

 

 

 

 

 

Dear Anthony,

We are back in Holland after a trip of nearly 5000 KMS through France and Spain....You can see how we packed.
As you can see I used straps for extra safety. The rack was doing very well only one time I had to pump one cup extra.

Jan
Holland

 

mazda mx5 mk1 boot rack

Murray & Lindy's MX5 Down Under

mx5 miata luggage rack

Revo-Rack MX5 Miata Luggage Rack loaded up and ready to hit the road

revo-rack mazda mx5 review

Jan's Revo-Rack loaded up with gear on his 5000km road trip in 2017

Revo-Rack Mazda Miata NA Luggage Rack ; Fitted in 90 seconds

 

 

 

Revo-Rack Miata NA Luggage Rack ; Secure, Stable, Safe