Miata NC Luggage Rack

Miata NC Luggage Rack :

Revo-Rack Black $429.95

Revo-Rack PA $499.95

red mazda mx5 with a luggage rack fitted carrying skis on a snowy hill top

Revo-Rack no metal clamps on trunk lid edges & certified to carry 45lbs. Works in all weathers !

 

Revo-Rack is a unique design of Miata NC Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern Miata trunk lid is the 2.7mm panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your Miata NC using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

side close up photo of a revo-rack luggage rack

Revo-Rack attaches using vacuum cup technology, no metal clamps to damage paint

In 2015 Revo-rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Revo-Rack fits both the soft top and PRHT and sits 3" off the trunk lid. Please read what our customers think of Revo-Rack here

silver mazda miata nc with a stainless steel luggage rack fitted

Perfect fit on the NC

 

Why a Revo-Rack Miata NC Luggage Rack ?

  • Precision manufactured frame with lightweight aluminium & magnesium T5 1" tube
  • No clamps on the fragile trunk/deck lid edges.
  • Shipped to the USA in 2-4 days with DHL
  • As the Revo-Rack is less than $800 there are no import duties & no state taxes
  • In manufacture since 2016 tried tested and used by thousand's worldwide
  • No Straps across the trunk/deck lid surface
  • Roof operation is possible with rack fitted on the PRHT model
  • Conceived, designed and engineered for the Miata/MX5
  • Revo-Racks load carrying capacity has been independently certified and tested by TUV Italy at 45lbs
  • Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
  • Revo-Rack is not designed for permanent fitting its designed for a days travel and then it needs to be removed overnight as the paint under the cups needs to exposed to the atmosphere.
  • Supplied with luggage straps and a storage bag.

The Rack Frame :

This Miata NC luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb  The cross bars are machine welded in place to ensure consistency. The rack frame measures  36"x17" We manufacture the frame in black powder coated finish or a version thats hand polished and anodised for a deep shine.

Revo-Racks frame is precision manufactured on the latest CNC machines, this ensures a high quality frame with no 'flaring'  or compression of the tube on the bends/straights

The Supports :

Revo-Rack is secured to your Miata NC using three 5" vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: These are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

The Revo-Racks vacuum cup's pump feature a pump button with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the pump evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows you to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the trunk lid

Soft rubber cannot chip scratch or mark paintwork

mazda mx5 luggage rack revo rack tested

Revo-Rack has been independently tested by TUV Italy, they applied a 645N force a lifting force of around 65kg for 10 minutes to a Revo-Rack with a 25kg load on it and the rack stayed secure. If attached properly Revo-Rack is as secure as a traditional clamp rack.

 

 

miata nc in red with a stainless steel luggage rack fitted

Revo-Rack PA - Polished & Anodised has a deep luster that we think is better than chrome or stainless steel.

silver mazda mx5 miata nc with a black luggage rack fitted photographed from behind

No metal clamps no damage.

aerial photo of a black mazda iata nc with a luggage rack fitted

Certified to carry 20kg/45lbs

white PRHT NC Miata with a black roof and black luggage rack fitted

Revo-Rack fits both the PRHT & fabric roof NC MX5

black mazda mx5 miata nc prht with a black luggage rack fitted and the roof operating

Roof operation on the PRHT is possible with the Revo-Rack fitted

mazda mx5 mk3 luggage rack details

Vacuum cup closed and secure ( moisten paintwork first )

black mazda miata nc with a luggage rack fitted to the trunk carrying a silver suitcase next to a lawn on a sunny day

Independently certified by TUV Italy to carry 50lbs

red mazda mx5 miata nc coupe cc prht with a luggage rack fitted carrying ski's covered in snow outside a hotel

Revo-Rack can be used in all weather conditions and we also stock a ski carrier accessory

revo-rack miata mx5 nc luggage rack being speed tested at 120mph

Revo-Rack undergoing independent high speed testing ( 120mph / 200kph ) by TUV at the Nardo test track in southern Italy

No 3M tape with a Revo-Rack !

white mazda mx5 with a luggage rack fitted with a waterproof holdall on it

The waterproof boot-bag vacation also made by us fits the Revo-Rack perfectly

Why risk it ?

convertible in silver with revo-rack luggage rack with silver suitcase on it and third brake light

Optional third brake light integrated into a luggage strap, required on the MK3/NC as any rack will obscure the third brake light or purchase a spacer kit to raise the rack 1" so the light can still be seen under the rack.

 

 

We have just completed our second long road trip with the Revo-Rack on the MX-5. This time we did 3,800km, mostly at high freeway speeds, but also plenty of curvy roads, and the rack held fast in all the wind blast and lots of lateral forces. Top up or top down, there was never a worry with the rack and luggage.

We couldn’t be happier with our purchase.

Murray and Lindy
Melbourne, Australia

 

 

 

 

 

Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s favorite roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future.

Matt

USA

 

 

 

 

 

Dear Anthony,

We are back in Holland after a trip of nearly 5000 KMS through France and Spain....You can see how we packed.
As you can see I used straps for extra safety. The rack was doing very well only one time I had to pump one cup extra.

Jan
Holland

mazda mx5 nc mk3 luggage carrier

Murray & Lindy's MX5 on their road trip with the Revo-Rack down under

 

 

x5 nc miata trunk rack review revo rack

Mathews Revo-Rack loaded up and ready to hit the road

 

mazda mx5 nc trunk luggage rack review

Jan's Revo-Rack fully loaded on his 2017 5000km road trip

 

 

Feedback on Revo-Rack from the UK MX5 Owners Club Forum

 

revo-rack for miata review

Revo Rack Mazda Miata NC Luggage Rack ; Fitted in 90 seconds

 

Revo Rack Miata NC Luggage Rack ; Secure, Stable, Safe