Volvo C70 trunk luggage rack :
Revo-Rack Black $429.95
Revo-Rack PA $499.95
Certified to carry 20kg/45lbs and enjoyed by customers since 2016 ( on Saab Fits C70 )
Revo-Rack is a unique design of Volvo C70 Trunk Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges. Revo-Rack can be fitted in under a minute.
We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.
We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible trunk lid is the small panel gap - there is no room for a metal clamp.
Revo-Rack attaches to your Volvo using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.
Revo-Rack attaches with huge force using soft rubber vacuum cups : the grey buttons pump the air out . These are not suction cups
In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.
Please read our customers review of the Revo-Rack
Why a Revo Rack Volvo C70 Trunk Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- In manufacture since 2016 tried tested and used by thousand's worldwide
- Perfect for modern sports cars with small panel gaps that make fixing a traditional clamp based rack almost impossible : no room for the clamp feet
- Fits any boot lid that takes the racks foot print of 102 x 48 cm / 58" x 29"
- Revo Racks load carrying capacity has been rated at 20kg / 45Ibs
- Fitted and removed in under a minute ( see video below )
- Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off, therefore theft is difficult.
- Supplied with 2 luggage straps and cotton storage bag
- Shipped from our warehouse in the Netherlands to the USA in 7-10 days with DHL
The Rack Frame :
This Volvo C70 luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your Volvo's trunk lid using three 5" vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still acknowledged as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 3" off the trunk lid
no metal to scratch paint
Revo-Rack is certified to ISO 11154 PAS 2006 the international standard for car roof bars.
If your C70 does not have the antenna then the rack can be fitted this way without a spacer kit
If you have the antenna at the rear of the trunk then you will need to order the spacer kit and fit the rack this way round.
Revo-Rack PA is hand polished for a deep shine
Revo-Rack also fits the Gen 1 1996-2005 C70 Cabriolet
Lightweight aluminium frame
On the first generation C70 we supply a spacer to raise the rear of the Revo-Rack so it sits level
Fitted in 90 seconds without tools
Optional anti theft strap
Hello Anthony I wanted to inform you that I received my Revo rack today I wanted to let you know of my total satisfaction. I will be sure to recommend it to all my friends who own a convertible. You will find attached the photos of my Volvo c70 equipped with your Revo rack Best regards Henry