Aston Martin DB9 Volante luggage rack :

Revo-Rack Black £349.95 / $429 / 399€

Revo-Rack PA £439.95 / $509 / 469€

 

Revo-Rack is a unique design of Aston Martin DB9 Volante luggage rack which virtually eliminates the risk of paint damage, caused by steel clamps or straps on the boot/deck lid edge. We manufacture the rack in two finishes using the same T5 Magnesium & Aluminium tubing, the rack frame is either powder coated black or hand polished then anodised. Revo-Rack has been in manufacture since 2016.

Revo-Rack attaches to your Aston Martin using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Please note : On the DB9 convertible its not possible to operate the roof when the rack is fitted, or open the boot/trunk as one or two vacuum cups are on the hood cover due to the shallow boot/deck lid but its 2 minutes to remove, operate and re-attach.

 

Why a Revo Rack Aston Martin DB9 Volante Luggage Rack ?

• No clamps
• No bolts
• No drilling
• No paint damage
• In manufacture since 2016 with thousands sold globally = Tried and tested
• Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE.
• Perfect for modern Aston Martins with small panel gaps that make fixing a traditional clamp based rack almost impossible : no room for the clamp feet
• Revo-Rack has been extensively tested by TUV Italy, it is certified to carry 20kg/45lbs.
• Fitted and removed in under a minute ( see video below )
• Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult.
• The Revo-Rack is supplied with a cotton storage bag and two luggage straps.
• Anti theft strap available.

 

 

 

 

The Rack Frame :

This Aston Martin DB9 Volante luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

 

The Supports :

The rack is secured to your Aston Martins boot/trunk lid using three 120mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still acknowledged as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid