Audi Luggage Rack 

Revo-Rack Black From £329.95 / $379 / 349€

Revo-Rack PA From £389.95 / $449 / 419€

 

Revo-Rack is a unique design of Audi luggage rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. We make the rack in two finishes using the same T5 aluminium & magnesium tube, it's either powder coated black or hand polished then anodised to create a deep shine.

With the Revo-Rack Audi Luggage Rack no metal touches your car only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Audi's boot or trunk. These are not suction cups, suction creates vacuum. The sir is physically pumped out the cup with the grey button resulting in a very secure hold.

 

Revo-Rack Fits :-

• All TT Roadster
• A4 Cabriolet
• A5 Convertible
• 80 Convertible
• R8 Spider

Why a Revo-Rack Audi Luggage Rack ?

• No clamps
• No bolts
• No drilling
• No paint damage
• In manufacture since 2016 with thousands sold globally = Tried and tested
• Fits all 3 models of TT convertible and does not interfere with spoiler deployment
• Conceived, designed and engineered for Audi's small panel gaps, too thin for a traditional clamp on the boot/trunk edge with a 3mm gap
• Revo-Racks load carrying capacity has independently assessed by TUV Italy at 20kg/45lbs
• Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult.
• The Revo-Rack is supplied with two luggage straps and a cotton storage bag.
• Optional anti theft strap available

 

 

The Rack Frame :

This Audi luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to your Audi's boot/trunk lid using three 115mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid