Mercedes SLK Luggage Rack R170 (1996-04)

Mercedes SLK Luggage Rack R170 ( 96-04 )

Revo-Rack Black £229.95 / $285 / 275€

Revo-Rack PA £269.95 / $350 / 305€

Revo rack is a completely new type of Mercedes SLK Luggage Rack R170. It eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. Revo-Rack can be fitted in under a minute. We manufacture the rack and its available in either a black finish, or a model thats hand polished and anodised (PA) for a deep shine.

With the Revo-Rack SLK luggage rack no metal touches your Mercedes only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your SLK's boot or trunk.

Whilst its possible to lower and raise the roof with the rack fitted, we advise against it as Mercedes will not have calibrated the motors to lift the extra weight of the rack and luggage. Its a one minute job to remove and re-attach the rack. Please see what our customers think of the Revo-Rack here

Why a Revo-Rack Mercedes SLK Luggage Rack R170

  • No clamps on the fragile boot/deck lid edge
  • No bolts
  • No drilling
  • No straps
  • No paint damage
  • Revo-Rack has been extensively tested by TUV Italy to ensure its safe. It underwent force tests, speed tests and braking tests - It passed all of the these. The only convertible luggage rack globally that has been tested in this way. Tested to ISO/PAS 11154:2006 Road vehicles - Roof load carriers & European Directive for the General Safety 2002/95/CE
  • Conceived, designed and engineered for the SLK's  small panel gaps and folding roof
  • Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs
  • Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.

The Rack Frame :

This SLK R170 luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17

The Supports :

The rack is secured to your SLK's boot/trunk lid using three 120mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid



No 3M stickers to compensate for poor design

One use stickers to stop damage ? An admission of poor design

SLK luggage rack damage

Metal on paint only ends one way and its not good

Soft rubber cannot chip or mark paintwork

mercedes benz slk mk1 luggage rack

Designed and engineered for the SLK

Mercedes SLK R170 Luggage Boot Rack

Lightweight aluminium frame can be fitted either way around

Revo-Rack Mercedes R170 Luggage Rack Trunk Carrier

No clamps on the fragile boot/deck lid edge.


chrome luggage rack fitted to a blue mercedes benz slk r170 200 kompresssor

Fitted in 90 seconds

boot rack fitted to a blue mercedes slk r170

Perfect for the SLK's small panel gaps no clamps to chip paint

stainless steel luggage rack fitted to a blue mercedes benz slk r170 taken from above

No clamps on the fragile boot/deck lid edges

revo-rack luggage rack for convertibles

Manufactured by us with care and precision

Mercedes SLK R170 luggage rack revo-rack with a boot-bag vacation attached

The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly ( Also manufactured by us )

Revo Rack Mercedes SLK Luggage Rack R170 ; Fitted in 30 seconds

Revo Rack SLK R170 Luggage Rack ; Secure, Stable, Safe




We would love to hear from you.