Porsche Boxster Spyder Luggage Rack

Porsche Boxster Spyder Luggage Rack :

Revo-Rack Black £329.95 / $379 / 349€

Revo-Rack PA £389.95 / $449 / 419€

 

white porsche boxster 987 spyder with a revo-rack black luggage rack fitted

Certified to carry 20kg/45lbs and enjoyed by customers since 2016

Revo-Rack is a unique design of Porsche Boxster Spyder luggage rack which eliminates the risk of paint damage, caused by steel clamps or straps on the trunk/boot lid edge. Revo-Rack comes in a choice of to finishes black powder coated or a version thats hand polished and anodised to create a deep shine. We have been making the Revo-Rack since 2016 with thousands sold globally

Revo-Rack attaches to your Boxster using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

silver XXX with a black revo-rack luggage rack fitted photographed very close

Revo-Rack attaches with soft rubber vacuum cups, no metal clamps that damage paintwork. The grey buttons pump the air out

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Why a Revo-Rack Porsche Boxster Spyder Luggage Rack ?

  • No clamps
  • No bolts
  • No drilling
  • No paint damage
  • In manufacture since 2016 tried tested and enjoyed by thousands
  • Designed and engineered for Porsche Boxster
  • Not immediately obvious how to remove the rack - theft is difficult.
  • Ultra Lightweight aluminium & magnesium frame. 1.67kg
  • Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs by TUV Italy
  • Revo-Rack has been independently safety tested by TUV Italy. Along with braking and speed tests to a loaded rack they applied a 645N force. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it. The rack stayed secure and did not bend or deform . If attached properly Revo-Rack is as secure if not more secure than a traditional clamp rack.
  • Supplied with two luggage rack and cotton storage bag

 

The Rack Frame :

This Porsche Boxster Spyder Luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to the rear of your Porsche using three 120mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

soft rubber cannot chip scratch or mark your Boxsters paintwork

porsche boxster luggage rack third brake light fitted to audi tt

Optional luggage strap with integrated third brake light

 

white porsche boxster spyder with a revo rack pa luggage rack fitted

Revo-Racks unique design allows it to fit the Boxster Spyder

side vie of the rear of porsche boxter 987 spyder with a black luggage rack fitted

Revo-Rack black fitted in 90 seconds without tools.

aerial view of a white porsche boxster spyder with a revo rack luggage rack fitted

Fitted in 90 seconds no clamps on the fragile boot/deck lid edges.

white porsche boxster spyder with a luggage rack fitted

No metal to chip paint

white boxster spyder with the roof off and a black luggage rack fitted on a lawn on a sunny day

Fitted in 90 seconds no awkward joint or brackets.

porsche boxster spyder with a trunk rack fitted

A perfect fit !

porsche 987 boxster luggage rack details stainless steel

Vacuum cup pumped and secure

porsche boxster luggage rack tested

Revo-Rack undergoing safety testing, here having a lifting force of 645N applied to it. (65kg/145lbs)

No damage with a Revo-Rack

 

 

Porsche Boxster Spyder Luggage Rack ; Fitted in 30 seconds

Revo-Rack Porsche Boxster Spyder Luggage Rack Certified ; Secure, Stable, Safe