Corvette C6 Convertible Luggage Rack

Corvette C6 Convertible Luggage Rack :

Revo-Rack Black £229.95 / $319 / 275€

Revo-Rack PA £269.95 / $385 / 320€

Revo-Rack is a completely new type of Corvette C6 convertible luggage rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the deck/trunk lid edge.

With the Revo-Rack car boot rack no metal touches your Corvette only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars trunk. The tiny panel gaps on modern Corvette's mean that fitting a conventional rack that clamps to the deck/trunk lid edge without paint damage is impossible - there is no room for the clamp. We manufacture the rack in two finishes, black powder coated and hand polished then anodised this results in a deep shine. Both models are made from the same T5 aluminium & magnesium tubing.

Why a Revo-Rack Corvette Convertible Luggage Rack ?

No clamps
No bolts
No drilling
No paint damage
Not immediately obvious how to remove the rack - theft is difficult.
Ultra Lightweight aluminium & magnesium frame. 3.7lb
Designed engineered and created for the tiny panel gaps on modern Corvette's
Revo-Racks load carrying capacity has been rated at 25kg / 55Ibs
Supplied with two luggage straps and cotton storage bag.

The Rack Frame :

This Corvette C6 Luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"

The Supports :

The rack is secured to the rear of your Corvette using three 5 " vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid