Mazda Mx5 Roadster Coupe Luggage Rack :

Revo-Rack Black £329.95 / $379 / 349€

Revo-Rack PA £389.95 / $449 / 419€

 

Revo-Rack is a unique design of Mazda MX5 Roadster Coupe Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 in two finishes powder coated black and the PA model which is hand polished and then anodised to create a deep chrome like shine. We only sell direct over the web. All Revo-Racks are supplied with two webbing luggage straps and a storage bag to keep everything in one place until you next use the Revo-Rack.

Revo-Rack attaches to your MX5 using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

Why a Revo-Rack Mazda MX5 Roadster Coupe Luggage Rack ?

• No clamps on the fragile boot/deck lid edge.
• No bolts
• No drilling
• No Straps across the boot/deck lid surface
• No paint damage.
• In manufacture since 2016 tested, tried and used by thousands of MX5 customers globally
• Roof operation is possible with rack fitted on the MX5 Roadster Coupe / PRHT model
• Conceived, designed and engineered for the MX5/Miata
• Revo-Racks load carrying capacity has been independently tested and certified at 20kg/45lbs
• Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
• If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
• Supplied with luggage straps and a storage bag.

 

The Rack Frame :

This MX5 coupe luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb  The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The rack measures 900x420mm  /  36"x17"

Vacuum cups ? 

Revo-Rack is secured to your MX5 Roadster coupe using three 120mm vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: These are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

The Revo-Racks vacuum cup's pump feature a pump button with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the pump evacuate the vacuum pad, causing it to seal securely to the car. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows you to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the boot/trunk lid

 

Hello Antony,

The Revo Rack arrived on time and we used it across Italy and France for 3 weeks - a total of over 4,500 km. It was super quick to set up and take down - it always held up. Just a super good part.

Alexander
Germany

 

 

 

 

 

 

Love the rack for our 2010 retractable hardtop Miata MX-5.

The revo-rack fits perfectly and is easy to install. The retractable top can be used with the rack installed, but only if there is no luggage on the rack at the time. We used it on a trip down the California coast on Hiway 1 from Monterey to Pismo Beach and had zero concerns or problems.

My wife made some custom leather straps to secure our suitcase to the rack and it looks VERY classy!

Troy

Fresno, California

 

 

 

 

 

Testing out my new PRHT Revo suction pad boot rack.

Fits a treat so easy to attach and remove quite literally seconds.

Chris

UK

 

 

 

 

 

Huge shoutout to the people across the pond at Revo-Rack. They didn’t pay me or anything to endorse them, but the rack is honestly the best possible solution for adding storage capacity to the world’s roadster. It left no marks and I am sure it would work well on other vehicles too. At around $300 the rack seemed expensive at first, but it worked flawlessly and even kept all that camping gear rock steady into triple digit speeds at one point. Plus it’s something that I’ll continue to use in the future.

 

Matt

USA

 

 

 

 

Dear Anthony,

We are back in Holland after a trip of nearly 5000 KMS through France and Spain....You can see how we packed.
As you can see I used straps for extra safety. The rack was doing very well only one time I had to pump one cup extra.

Jan
Holland