Buick Cascada Trunk Luggage Rack

Buick Cascada Trunk Luggage Rack :

Revo-Rack Black $409

Revo-Rack PA $489

Revo-Rack is a unique design of Buick Cascada trunk luggage rack that eliminates the risk of paint damage, caused by steel clamps or straps on the trunk lid edges.We manufacture the Revo-Rack in either a black finish or a version thats hand polished and anodised for a deep shine. Both models use the same T5 aluminium & magnesium tubing.

Revo-Rack attaches to your Cascada using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

silver XXX with a black revo-rack luggage rack fitted photographed close from the side

Revo-Rack attaches with huge force using soft rubber vacuum cups : the grey buttons pump the air out . These are not suction cups

In 2015 Revo-rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

 As the trunk lid is very shallow on the Cascada the rack must be mounted as shown in the photos with the hoop at the rear of the trunk and on the hood cover, thus its not possible to operate the roof with the rack fitted, or open the boot/trunk but its a one minute job to remove, operate roof and re attach.

 

Why a Revo-Rack Cascada Luggage Rack ?

  • No clamps
  • No bolts
  • No drilling
  • Shipped to the USA in 2-4 days with DHL
  • As the Revo-Rack is less than $800 there are no import duties & no state taxes
  • In manufacture since 2016 tried tested and used by thousand's worldwide
  • No paint damage
  • Perfect for todays cars with panel gaps too small for a traditional clamp
  • Revo-Racks load carrying capacity has been rated at 45Ibs
  • Not immediately obvious how to release the rack from the trunk lid - Impossible to pull off therefore theft is difficult.
  • Supplied with two luggage straps and a cotton storage bag

 

 

The Rack Frame :

Revo-Rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only  3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17

The Supports :

This boot rack is secured to your Cascada's trunk lid using three 5" vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits  3" off the trunk lid

Soft rubber cannot chip scratch or chip paint

 

 

 

black buick cascada with a revo-rack trunk luggage rack fitted to the trunk

Revo-Rack black no clamps on the fragile trunk lid edges

side view of a black buick cascada with a revo-rack luggage rack fitted

Due to the ultra shallow trunk/boot lid one of the vacuum cups has to be placed on the hood cover thus its not possible to operate the roof or open the trunk with the rack fitted, but two minutes to remove operate/open and refit !

stainless steel luggage rack fitted to a cascada convertible

Revo-Rack PA is hand polished for a deep shine.

side view of a buick cascada with a revo-rack PA luggage rack fitted

Fitted in 90 seconds no wrench required.

rear view of a buick cascada with a revo-rack luggage rack fitted

Certified to carry 45lbs / 20kg

buick cascada trunk luggage deck rack

If your have a Buick Cascada with the Sirius Antenna the rack will unfortunately have to fitted slightly off centre to avoid the fin. Please make sure you order the spacer kit to raise the rack up

Cascada Luggage Rack Close

Ultra lightweight aluminium and magnesium tube.

Cascada Luggage Rack revo-rack with a boot-bag vacation fitted

The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly, it also manufactured by us in the UK.

 

Revo-Rack Buick Cascada Trunk Luggage Rack ; Fitted in 90 seconds

 

Cascada Luggage Rack ; Secure, Stable, Safe