Miata ND Luggage Rack

Revo-Rack Black $439.95

Revo-Rack PA $549.95

 

 

Revo-Rack is a unique design of Mazda Miata ND Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile trunk lid edges.

We have been manufacturing the Revo-Rack since 2016 in two finishes black and the PA model which is hand polished and anodised to create a deep chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015 when the ND was launched. The issue with fitting a conventional metal clamp based luggage rack to the ND is the 0.16"/2.7mm panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your Miata ND using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

We are of course aware that Mazda suggests a maximum load of 10kg/22lbs for their carbon fibre rack on the ND because of the cars aluminium trunk lid. This clamps on a like a conventional rack with the load spread over a very small area 20cm².The footprint of the clamps on the edge of the trunk lid.

With a Revo-Rack the load is spread over a much greater area over 300cm² The footprint of the vacuum cups.Hence the Revo-Rack can carry a greater load of 20kg/45lbs with no risk of damage to the trunk lid. Think of this like standing or a frozen lake or skimming across it on your belly. One will cause thin ice to crack the other won’t

Please see what our customers think of the Revo-Rack  

 

 

Why a Revo-Rack Miata ND Luggage Rack ?

• No clamps on the fragile aluminium trunk lid edges
• Precision made lightweight aluminium & magnesium alloy frame 3.6lbs
• We follow Mazda's 'gram strategy' putting a heavy steel framed luggage rack on the ND totally ignores Mazda's ethos for the car.
• Shipped to the USA in 2-4 days with DHL
• As the Revo-Rack is less than $800 there are no import duties & no state taxes
• Tested to ISO/PAS 11154:2006 Road vehicles
• No Straps across the deck/trunk lid surface
• In manufacture since 2016 - tried & tested by thousands of happy customers.
• Conceived, designed and engineered for the MK4/ND MX5/Miata
• Due to the 0.106" panel gap on the ND its too small for a traditional clamp to fit, the 45 degree lip inside the trunk makes this almost impossible.
• Revo-Racks load carrying capacity independently tested and certified at 45lbs 
• Supplied with two luggage straps and a cotton storage bag
• Revo-Rack is not designed for permanent fitting its designed for a days travel and then it needs to be removed overnight as the paint under the cups needs to exposed to the atmosphere.

 

The Rack Frame :

This Miata ND luggage rack is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 3.6lb perfect for the ND's aluminium boot/trunk lid. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black or hand polished and anodised. The Revo-Rack frame measures 36"x17"

 

Vacuum Cups :

Revo-Rack is secured to your Miata ND using three 5"/120mm vacuum cups. These are rated by the manufacturer as capable of holding an 18kg/40lb load each. These are not suction cups.

Vacuum cups employ the force of atmospheric pressure to grip a surface: These are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump the air out from the cup creating a huge securing force.When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more secure hold.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. Revo-Rack sits 7.5cm / 3" off the trunk lid