Alfa Romeo Spider luggage rack :
Revo-Rack Black £229.95 / $319 / €275
Revo-Rack PA £269.95 / $385 / €309
Revo-Rack is a completely new type of Alfa Romeo Spider luggage rack which eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge. This rack fits the classic Alfa Romeo Spider made from 1966-93, the 916 (1993-04) and the Brera Spider made from 2006-10. We manufacture the rack in two finishes using the same T5 aluminium and magnesium tubing, its then either powder coated black or hand polished and anodised.
With the Revo-Rack car boot rack no metal touches your Alfa only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk.
Why a Revo-Rack Alfa Romeo Spider Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- Perfect for modern Alfa Romeo's with small panel gaps that make fixing a traditional clamp based rack almost impossible : no room for the clamp feet
- Revo-Racks load carrying capacity has been rated at 25kg / 55Ibs
- Fitted and removed in under a minute ( see video below )
- Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off, therefore theft is difficult.
- If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
- The Revo-Rack is supplied with a cotton storage bag and two luggage straps
- Optional anti theft strap available
The Rack Frame :
This Alfa Romeo Spider luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to your Alfa's boot/trunk lid using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still acknowledged as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Alfa Romeo Spider Luggage Rack ; Fitted in 30 seconds
Revo Rack Alfa Romeo Spider Luggage Rack ; Secure, Stable, Safe