Porsche Boxster Luggage Rack :
Revo-Rack Black £229.95 / $285 / 275€
Revo-Rack PA £269.95 / $385 / 320€
Revo-Rack is a completely new type of Porsche Boxster luggage rack that virtually eliminates the risk of paint damage, caused by steel clamps or straps on the boot/deck lid edge. We manufacture the rack ourselves in two finishes powder coated black and a hand polished anodised version which has a deep shine. Both are made from the same T5 aluminium and magnesium tubing.
With the Revo-Rack car boot rack no metal touches your Porsche Boxster only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk.The tiny panel gaps on modern Porsche's mean that fitting a conventional rack that clamps to the boot/trunk lid edge without paint damage is impossible - there is no room for the clamp.
The standard Revo-Rack fits the 986,987,981 and the new 718. Please read what our customers think of the Revo-Rack here
Why a Revo-Rack Porsche Boxster Luggage Rack ?
- No clamps
- No bolts
- No drilling
- No paint damage
- Designed and engineered for Porsche Boxster
- Not immediately obvious how to remove the rack - theft is difficult.
- Ultra Lightweight aluminium & magnesium frame. 1.67kg
- Revo-Racks load carrying capacity has been rated at 25kg / 55Ibs
- Supplied with two luggage straps and a cotton storage bag.
The Rack Frame :
This Porsche Boxster Luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm / 36"x17"
The Supports :
The rack is secured to the rear of your Porsche using three 120mm vacuum cups, rated by the manufacturer as capable of holding an 18kg/40lb load each.
Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the surface, distortion is reduced, allowing the cup to be used with very little risk of damage.
The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. Introduced in the1960's, this safety device is still recognized as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.
Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid
Porsche Boxster Luggage Rack ; Fitted in 30 seconds
Revo-Rack Porsche Boxster Luggage Rack ; Secure, Stable, Safe