Jaguar F Type Luggage Rack – unique design

Jaguar F Type Luggage Rack

Revo-Rack Black £229.95 / $319 / 275€

Revo-Rack PA £269.95 / $385 / 309€

Revo -Rack is a completely new type of Jaguar F Type luggage rack that virtually the risk of paint damage, caused by steel clamps or straps on the boot/deck lid edge.

With the Revo-Rack Jaguar F Type Convertible Luggage Rack no metal touches your car only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk. We manufacture the rack ourselves and its available in two finishes black or a version thats hand polished then anodised for a deep shine, both models use the same lightweight aluminium tubing.

Why a Revo-Rack Jaguar F Type Luggage Rack ?

  • No clamps
  • No bolts
  • No drilling
  • No paint damage
  • Does not interfere with spoiler deployment
  • Conceived, designed and engineered for Jaguar F Type's small panel gaps, too thin for a traditional clamp on the boot/trunk edge with a 3mm gap
  • Revo-Racks load carrying capacity has been rated at 20kg / 45Ibs by TUV Italy
  • Revo-Rack has been independently tested by TUV Italy. Along with braking and speed tests to a loaded rack they applied a 645N force. A lifting force of around 65kg/145lbs for 10 minutes to a Revo-Rack with a 25kg load on it the rack stayed secure and did not bend or deform . If attached properly Revo-Rack is as secure if not more secure than a traditional clamp rack.
  • Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult. Anti theft strap available
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.
  • Supplied with two luggage straps and cotton storage bag.

The Rack Frame :

This F Type luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

The Supports :

The rack is secured to your F Types boot/trunk lid using three 115mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

A lifting force of 645N ( 65kg/145lbs ) being applied by TUV Italy to a loaded Revo-Rack for a period of 10 minutes, the rack did not deform or become unattached.

jaguar f type luggage rack details

Soft rubber cannot mark scratch or damage paint

F Type stainless steel luggage rack close

Vacuum cup pumped and secured to paintwork

No 3M stickers to compensate for poor design

One use stickers ? Not ideal if you plan to use the rack more than once...


red jaguar f type convertible with a black luggage rack fitted

A perfect fit in 90 seconds without any tools

jaguar f type stainless steel luggage rack

Revo-Rack PA has a deep shine

Revo-Rack black luggage rack fitted to blue jaguar f type

Revo-Rack Black

jaguar f type chrome trunk rack

Does not interfere with spoiler operation

black luggage rack fitted to f type jaguar convertible

No clamps No Brackets No Damage

jaguar f type convertible luggage rack revo-rack with a boot-bag vacation fitted

The boot-bag vacation waterproof luggage bag fits the Revo-Rack perfectly ( its also made by us )

f type deck trunk rack

Perfect for the F type's boot/deck lid

revo rack luggage rack fitted to blue jaguar

A modern rack for a modern Jaguar

Revo Rack Jaguar F Type Luggage Rack ; Fitted in 30 seconds

Jaguar F Type Luggage Rack ; Secure, Stable, Safe


We would love to hear from you.