Ferrari California Luggage Rack

Ferrari California luggage rack : Revo-Rack £229.95 / $285 / 275€

Revo rack is a completely new type of Ferrari California luggage rack which eliminates the risk of paint damage, caused by steel clamps or straps on the boot/trunk lid edge.

With the Revo-Rack car boot rack no metal touches your Ferrari only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your cars boot or trunk.

 

Why a Revo Rack Ferrari California Luggage Rack ?

  • No clamps
  • No bolts
  • No drilling
  • No paint damage
  • Perfect for modern sports cars with small panel gaps that make fixing a traditional clamp based rack almost impossible : no room for the clamp feet
  • Fits any boot lid that takes the racks foot print of 102 x 48 cm  / 58" x 29"
  • Revo Racks load carrying capacity has been rated at 25kg / 55Ibs
  • Fitted and removed in under a minute ( see video below )
  • Not immediately obvious how to release the rack from the boot/trunk lid - Impossible to pull off therefore theft is difficult.
  • If you do stop for a prolonged period and are concerned about your luggage we suggest you remove the rack and luggage and place it inside your car, a 30 second task.

The Rack Frame :

This luggage rack is manufactured from 25mm/ 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 900x420mm  /  36"x17"

 

The Supports :

The rack is secured to your Ferrari's boot/trunk lid using three 120mm vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still acknowledged as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lid

 

Soft rubber cannot mark scratch or chip paintwork


 

 

Ferrari  California Luggage Rack

Ferrari California Luggage Rack - Fitted in seconds

 

Ferrari California Luggage Rack

Ultra lightweight 1.67kg / 3.5 Lbs

 

Bentlry Continental luggage rack frame close up

Aluminium and Magnesium tube.

 

revo-rack-car-luggage-rack-vacuum-cup-close

Ferrari Luggage Rack Vacuum Cup, closed & secure.

 

Revo Rack Fiat 124 Spider Luggage Rack Vacuum Cups

Where the Revo-Racks Vacuum Cups were developed.

Ferrari Luggage Rack ; Fitted in 30 seconds

Revo Rack Ferrari Luggage Rack ; Secure, Stable, Safe

Purchase
Contact
About
Testimonials

We would love to hear from you.