Lotus Esprit Luggage Rack

Lotus Esprit Luggage Rack :

Revo-Rack Black £329.95 / $419.95 / 349.95€

Revo-Rack PA £389.95/ $494.95 / 419.95€ 

 

red lotus esprit with a revo-rack luggage rack fitted carrying a blue suitcase

In manufacture since 2016 and certified to carry 20kg/45lbs

Revo-Rack is a unique design of Lotus Esprit Luggage Rack that eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edges. Revo-Rack can be fitted in under a minute.

We have been manufacturing the Revo-Rack since 2016 with the choice of two finishes black or PA (polished anodised) which creates a chrome like shine. We only sell direct over the web.

We designed Revo-Rack in 2015. The issue with fitting a conventional metal clamp based luggage rack to a modern convertible is the small panel gap - there is no room for a metal clamp.

Revo-Rack attaches to your Lotus using vacuum cup technology, these are not suction cups. Suction is what creates vacuum. Vacuum is the total absence of air whereas suction is the process done to achieve a vacuum. The grey buttons on the side of the cups pump out the air creating a huge, securing force.

silver XXX with a black revo-rack luggage rack fitted photographed very close

Revo-Rack attaches with soft rubber vacuum cups, no metal clamps that damage paintwork. The grey buttons pump the air out

In 2015 Revo-Rack was independently certified by TUV Italy part of the global TUV testing and certification business. It went through speed, braking and force tests, to ISO 11154:2006 Revo-Rack passed all these tests and is certified to carry 20kg/45lbs. Since 2016 we have sold over 10,000 Revo-Racks and never had a failure.

We have been made aware that the standard Revo-Rack fits the Lotus Esprit by a customer in the USA see the Lotus Talk Forum for his thoughts

 

 

Why a Revo-Rack Lotus Esprit Luggage Rack ?

  • No metal clamps to chip paint
  • Shipped globally with DHL
  • USA shipping 2-4 days / EU 1-2 / UK 1-2
  • No drilling
  • No paint damage
  • Revo-Racks load carrying capacity has been rated by TUV Italy at 45Ibs
  • Certified to ISO 11154 : 2006
  • Fitted in 90 seconds without tools
  • Supplied with two luggage straps & cotton storage bag

 

The Rack Frame :

The frame is manufactured from 1" 6063-T5 tubing this is an aluminium and magnesium alloy ( it will never rust )  As a result the rack frame weighs only 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is powder coated black. The rack measures 36"x17"

The Supports :

The rack is secured to the trunk lid using three 5" vacuum cups,  rated by the manufacturer as capable of holding an 18kg/40lb load each.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the  paint surface, distortion is reduced, allowing the cup to be used with very little risk of damage.

The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator.  A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden inside the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.

Lifting on the release tab near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits  3" off the trunk lid.

 

close up of the vacuum cup on the g29 z4 bmw luggage rack

Soft rubber cannot chip or scratch paint

 

 

red lotus esprit with a revo-rack luggage rack fitted photographed from the rear

Lightweight aluminium frame

red lotus esprit with a revo-rack luggage rack fitted photographed from the side

A perfect fit !

black audi r8 spyder in the rain with a revo-rack pa luggage rack iftted

Revo-Rack PA is hand polished for a deep shine

rear of a black audi r8 spyder with a revo-rack luggage rack fitted in the rain outside an audi dealership

In manufacture since 2016 and certified by TUV to carry 45lbs

Please check the Revo-Rack will fit your Esprit prior to purchase as we are aware they are different generations !

red lotus esprit v8 with a revo-rack luggage rack fitted and the engine boot trunk cover open

Many thanks to Edgar in the USA who made us aware the Revo-Rack fits the Esprit, and supplied these photos

bmw g29 luggage rack undergoing testing

TUV tested here undergoing a lifting test of 645N ( approx 65kg ) for 10 minutes a test the rack passed.

Lotus Esprit Luggage Rack ; Fitted in 90 seconds

 

 

 

Lotus Luggage Rack ; Secure, Stable, Safe